This concrete floor cleaner removes any residual grease and curing agent to prepare it for final finishing.
- Concrete floors cured with Roc Cure or other resin-based curing agents
Decap Roc is a liquid solvent-based cleaner for new concrete floors. It is mixed with water on site, and applied as a concrete preparation to a cured concrete surface. It removes residual curing agents to leave a matt concrete surface.
For resin-based curing agents
Decap Roc is designed to remove our Roc Cure curing agent, but will also remove other resin-based curing agents too.
Decap Roc is not needed for floors which have been cured with a water-based curing agent (such as Ecocure 17). The surface should be cleaned with Roc Neutre, and then treated with Roc Finish.
Easy to mix and apply
Decap Roc is supplied as a fluid, ready to dilute with water on site. It can be applied using a floor scrubber or airless spray. After 5 or 10 minutes, the floor should be cleaned using a single-disc professional cleaning machine, with a red buffing pad and vacuum suction.
Clean and seal to finish
After Decap Roc has been removed, the floor should be cleaned with our cleaning detergent, Roc Neutre, to leave a clean, matt surface. Once dry, treat the floor with Roc Seal to provide solvent-based waterproofing and oil protection; or Roc Finish water-based emulsion.
More technical information is provided on our datasheet, which can be downloaded from this page. We are happy to give advice about using Decap Roc. If you have any questions, please contact our technical team.
Decap Roc is a solvent-based cleaner, so it is advisable to wear gloves and eye protection when using it, and avoid breathing the fumes. If you get any on your hands, wash them well. Seek medical attention if you get it in your eyes. A safety data sheet is available on request, or ask us if you have any specific questions or concerns. Decap Roc is non-flammable.